The X1 aircraft is comparable in size to a small regional airliner and can achieve a maximum takeoff weight exceeding 25,000 pounds with the help of four wing-mounted electric motors. The battery-electric propulsion system delivered more than one megawatt of power during the maiden flight.
@betanumerus@lemmy.ca
@rimu@piefed.social I specified short distances. By the take you get to the airport an hour early the train has covered a fairly long distance. Nobody wants to live near an airport as airplanes are inherently noisy, but trains are quiet.
Have you lived next to a track where trains travel frequently? The noise is mostly ok, however the vibrations are not. I would not live closer than 1 km or so from the track, otherwise you feel the house vibrate every time a train passes. Good luck if the trains pass each hour, especially during the nights.
Airports are worse tho, I’ll give you that.
It the make a small airport electrics only, the airport can be right inside the city.
I have spent my entire childhood in a house at a mere 125m away from the train tracks, with trains passing 8 times per hour (excl. freight which also passes every now and then). You could faintly hear them if you were in the garden, but never in a bothersome way. I have not once felt anything vibrate from a passing train. Maybe this is different for poorly built houses? But it really shouldn’t be an issue.
Could be that the house or ground type is different. I also lived there for only a few months, which could be too short to get used to it. Would not choose to live close to frequently used tracks again though.
I would think that house was from the cheaper end though, which could explain things.
@Scheisser@sh.itjust.works
@rimu@piefed.social @betanumerus@lemmy.ca
That is very much a it depends. Freight trains are like that, as are passenger trains on steel bridges, or anything with a large diesel engine. However we know how to make tracks that are not like that. Concrete bridges dampen vibration well. Elective EMUs are also much quieter.