I’m using Fusion360, and I dislike it for a lot of reasons, but it’s easy to use. I tried FreeCAD, but it was very janky in comparison. Shapr3D was surprisingly good, but there’s no way I’m paying monthly for my hobby usage. I need precision prints, so I can’t just use Blender or similar.
Is there some magical unicorn software I’m not finding?
You must log in or register to comment.
FreeCAD, but basically because it was free and open source when I started learning (which wasn’t long ago anyways)
SolidWorks and Creo primarily, if I don’t want to boot into Windows I’ve been using OnShape recently.
90% fusion
9% tinkercad
1% dicking around in OnShape, getting frustrated, and giving up
OnShape. If you’re familiar with Fusion360, OnShape requires almost no additional learning. Workflows are pretty much the exact same. It’s free under the guise that everything you make is OnShapes IP. But if you’re looking to model casually and aren’t making things you wish to patent, it’s great.
Not open source if that’s a requirement.
It’s free under the guise that everything you make is OnShapes IP.
This sounds insanely predatory and messed up. Is this not as absolutely nuts as it sounds? O.o
Just make a tool, and take someone else’s work with that tool as your own? For real? This sounds really sus.
Ya agree with ya there
FreeCAD, runs on a damn potato. Fusion bakes it into charcoal instead. At least that is my experience on a kinda low-end laptop.
Oh, fusion is a heavy beast for sure. I just can’t stand FreeCAD’s interface.
I just wish someone would make an open source project with sketch based modeling and…. That’s all! I don’t need materials, rendering etc. I literally only need STL export.
But it needs to be as easy as shapr3d—which is marvelous, but $38usd/m for some stupid reason.
FreeCAD and OpenSCAD. FreeCAD is steadily getting better and better.
FreeCAD. Anything that’s not opensource is basically using you for some nefarious purpose. You’re a product or a product in the making or you’re making a product for them…you could be training a CAD AI to end all CAD.
FreeCAD is us. You use it, if you find a problem you report it or fix it. That simple. Your CAD files don’t die because the company changed CEO or died.
OpenScad because I do simple things like funnels or part bins.
What sort of precision are you not getting from blender?
Once you set the parameters (I set mine to mm), I have found it to be accurate enough to make additional tools with which to measure.
Mind you, I don’t need accuracy down past a mm.
I like using Blender too. Granted, I’m already somewhat familiar with it for art purposes. But just for STLs, if you know what you’re doing you can actually get away with quite a bit using a boolean CAD-like workflow!
FreeCAD, and I recommend you give it a second try, while watching the excellent tutorials from Deltahedra and Mangojelly on YouTube. Lots of the jank can be avoided if you only know how, so the tutorials are extremely useful.
FreeCAD has gotten exponentially better with each release the last few years, and both active developers and funding/donations from users have increased exponentially. The future is bright. And unlike the “free” commercial programs, FreeCAD is immune to future rug-pulls and enshitification.
You might also want to try https://dune3d.org/ , a relatively new 3D CAD software
SolidWorks
No, all CAD software sucks. I use FreeCAD myself and just got used to the jank.
FreeCAD has possibly the worst UI I have ever used combined with some of the worst UX of any software. But it has every feature I need, it’s free and it works (mostly).
I haven’t used it in awhile, but OnShape I think had the best UI, for being in a browser.
There are some macros out there I’ve found that make FreeCAD a lot better. I kinda wish they had a half-decent reference for macro writing; they’ll point you to their unfinished out of date wiki if you ask.
Omg. I swear they rename/move a bunch of things every update so every guide is just a little bit out of date.
The answer they give you is “If you want it written, YOU write it.” Which…it’s no wonder open source software doesn’t hold up, right? It’s made by idiots who think it’s up to end users to write the manual.
Idk Creo has pretty awful UX
100% this. Ive been through 4 different cad packages professionally and every single one of them is terrible bad awful garbage. Pick your flavor of garbage and get with it.
After a few months of forcing myself to learn it, FreeCAD really isn’t that bad. It’s miles better than Creo.
I use FreeCAD.
I follow Mango Jelly Solutions and DeltaHedra on YouTube for tutorials.
I’ve had excellent results designing items for 3D prints.
Mango’s videos are great. I’d wager there are gems in there for even experienced users of freecad. I’m often surprised by some of the tricks he has.
I absolutely love freecad. There are dozens of us that actually really like it
I was learning with freecad.
Tried to defeature the screw holes on Steam Controller model and it crashed the application :/
I’m still learning so I have no idea how to do that manually :<
FreeCAD. It’s janky, absolutely, but it’s quite powerful once you get used to it. Improved a lot with the latest major update as well.
I also tried OpenSCAD for a bit. As someone with a programming background, I really like the principle of how it works. But ultimately, I found it way too limiting.
I used OpenSCAD for a bit, and it’s good for simple things where clicking is far less efficient. I once needed a plate with a set of holes. OpenSCAD was great.
Look up how to use FreeCAD’s spreadsheet.
