• TootSweet@lemmy.world
    link
    fedilink
    English
    arrow-up
    16
    ·
    edit-2
    1 day ago

    You plugged those into the wrong ports. You’re supposed to plug both ends into here:

    220v power outlet

    Don’t worry if you have to use a lot of force to get it in there. That’s just to make sure it doesn’t come out if you trip over it.

      • Junkers_Klunker@feddit.dk
        link
        fedilink
        arrow-up
        11
        ·
        1 day ago

        NEMA is an American standard used in North America and parts of Asia. NEMA 10-30 specifically is a dual voltage socket that delivers 120V or 240V depending on whether you use L1/Neutral or L1/L2. It isn’t used anymore though as it isn’t grounded.

        • AnUnusualRelic@lemmy.world
          link
          fedilink
          English
          arrow-up
          8
          ·
          21 hours ago

          The convenient 73 variants insure that you cannot use the wrong plug into the wrong outlet, thus increasing user safety through simple design choices.

          • Junkers_Klunker@feddit.dk
            link
            fedilink
            arrow-up
            3
            ·
            19 hours ago

            Yea there’s too many variations, but I don’t dislike the concept of different designs for different currents. Here in Denmark there is zero difference between a 10A, 13A or 16A 230V outlet, you’ll only know when the fuse blows. Though most outlets in the house is 13A. We also use the CEE standard, but that is mainly for industrial use and sucks to connect and disconnect.

        • TootSweet@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          21 hours ago

          I’ve got one in my wall and my clothes dryer is plugged into it. My house was built in 1962 and the electrical situation in my house remains the fucking nightmare it was when the house was built, though.