I’m looking at quad port 2.5Gbe Intel PCIe cards. These cards seem to be mostly x4 physically (usually PCIe gen 3) whilst I have a PCIe Gen4 X1 slot, which is more the theoretical bandwidth that the card can support. The card needs at the most PCIE Gen 3 X2 == PCIE Gen 4 X1 in terms of bandwidth.
How do I fit the card into a PCIe x1 slot? Won’t it lose performance if all the pins are not connected to the physical PCIe connector? Is there a PCIe x1 riser that the community likes that is somewhat affordable?
Thanks
If your card has an x4 pinout, then it probably needs the additional bandwidth. Plugging it into an x1 slot (if it was possible) would slow down the network traffic. Get a better motherboard with an x4 slot on it so you can use the hardware you want. or find something else that will fit your computer.
Honestly even the 1Gb quad port card I have requires an x4 slot, although I saw some dual-port 2.5Gb x1 cards on ebay. Maybe you could just use two of those?
It doesn’t need that kind of bandwidth. 6 gigabit ports cannot saturate pcie gen 3 x1 in terms of bandwidth anyway.
What do I do if the card is PCIe gen 2 x8 though?
Potentially the same thing, assuming PCIe 2 x1 provides enough bandwidth.
Pcie 2.0x1 would have a theoretical max of 4gbit/s so it would probably only handle 3.5 gigabit of connections simultaneously.