Edit: the duality between “lol get curtains” and helpful things is great. But! I can’t put up curtains on the windows the light floods in - it’s the front door and the sort of side window beside the front door. Since I rent, I’m not going to put holes in the door, nor do I think it would look decent enough not to bother me. But also for those concerned about safety of sidewalks, I don’t have a sidewalk on my side, I’d only be blocking light on the front yard and hopefully into the house. But thanks y’all, this has been helpful:))

Basically I’m looking for maybe a semi unethical tip so I can cover the half of the street lamp that shines the light of freaking Helios’ arsehole in my windows every night.

I don’t want to permanently ruin it because I only rent this house and I don’t wanna get in trouble. But it’s way too bright and so very annoying.

So my thoughts are maybe duct tape, or maybe some sort of latex paint I can later peel off? I’m just not sure either will stand up against the elements.

Insofar as the lamp itself is concerned, it’s not one of those with a bent neck. It’s like a lantern on a 9 foot pole. So it should be easy(?) to cover half the glass, I should think.

  • DidIReallySayThat@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    12 hours ago

    I used to work for AEP, so I dont know if this will work everywhere, but if a neighbor called because of a outdoor light, they could request a work out to see if theres something that could be done, such as adjusting or shading.

    Good luck.

  • Agent641@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 day ago

    I used to have a streetlight that beamed into my front room.

    I did some research on the type of streetlight, bought a security bit that was the right fit to unscrew the access panel near the base, and ripped out the big fuse that lives there. Put the panel back in place. The city never fixed it. If they did I would have taken that fuse too

    When I was a kid we had a way of disabling streetlights with no tools. We learned that if you get one kid on either side of it, and push-pull it at the right frequency, you can get it to oscillate in a feedback pattern until the top of the lamppost was shaking back and forth so hard the globe would shatter.

  • sunsofold@lemmy.zip
    link
    fedilink
    arrow-up
    2
    ·
    1 day ago

    Even if we ignore the possible legal trouble of modifying street fixtures without permission, building anything that can hold up out in the wind and rain is going to be a big task. Getting it up there safely is going to be a challenge. Making sure it’s secure so the next puff of wind doesn’t send it down on someone’s head, maybe even yours, will be another challenge. I’ll make a recommendation for ‘blue tack’ and some heavy cardstock or plastic in front of the windows. The blue can hold for years, but leaves zero marks, and the right material could be chosen to allow whatever amount of light through, anything from all to none. Project boards like kids use for school presentations could be great. They can be cut easily to whatever shape the window is, painted or drawn on for decorative purposes, and even offer a little bit of extra insulation.

  • Mo.@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 day ago

    They make non-permanent (no adhesive) vinyl window and privacy film. You just order the right size, clean the window really well, wet the window and the sheet, stick the sheet on, trim it to size, then squish it flat with something like a credit card to get all the bubbles out. When it’s time to move out just peel it off.

    Cheap, nondestructive, no adhesive, easy clean up. And you can get it in various tints clear on up to blackout.

  • CTDummy@piefed.social
    link
    fedilink
    English
    arrow-up
    39
    arrow-down
    1
    ·
    3 days ago

    Any rotating shift worker will tell you. Black out curtains. They’re a god send.

    • HobbitFoot @thelemmy.club
      link
      fedilink
      English
      arrow-up
      7
      ·
      3 days ago

      This is honestly the best way of dealing with it. Any modifications to the light or likely going to invite repairs and attention from the city.

    • ten8tp@reddthat.com
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 days ago

      Sleep mask for sure. And not a cheap ass flemsy satin-like ones you get with the dom/sub pack at your nearest adult store!

      I recommend the Manta Sleep ones. Used the smaller one for 4 years before the Velcro finally gave in. Immediately bought the regular ones and kept using the eye cups from my old ones. It was a godsend working third shift.

      Haven’t tried the heated or cooled cups so ymmv.

  • actionjbone@sh.itjust.works
    link
    fedilink
    arrow-up
    41
    arrow-down
    4
    ·
    3 days ago

    Do not modify a public street lamp. It is not yours. More importantly, you’ll be creating an unsafe environment.

    Put up curtains.

  • aramis87@fedia.io
    link
    fedilink
    arrow-up
    11
    ·
    2 days ago

    Edit: the duality between “lol get curtains” and helpful things is great. But! I can’t put up curtains on the windows the light floods in - it’s the front door and the sort of side window beside the front door.

    I also didn’t want to put holes in the wall, so I got command strips (those little stick-on / pull-off hooks) and used them to hang my curtains. If the way it looks bothers you, you could hang a piece of decorative cloth in front or back of the curtain.

  • The duality of lemmy:

    “I am SHOCKED someone would ILLEGALLY MODIFY something that ISN’T THEIRS!”

    Vs

    “lol firebomb time”

    Legit, if you’d rather put in work to modify a street light and risk the consequences instead of putting up curtains, use old cardboard boxes cut in such a way that it drapes a long side over your house’s direction, but not long enough to impede light on sidewalks.

    Less work, less cost, less chance of being arrested.

    I do understand not wanting to have to use blackout curtains, as I like looking outside.

    Personally I use a 100w led spotlight I made, and point it at the street light for a minute or so if I want it off. Works for a few minutes, at least.

    • FuglyDuck@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      2 days ago

      firebomb?

      naw. that’s a bit much. a .22 lr and some target practice will do the trick.

      (but seriously, maybe just invest in some decent black out curtains.)

  • slazer2au@lemmy.world
    link
    fedilink
    English
    arrow-up
    20
    ·
    3 days ago

    Have you considered talking with your council about it? It is their utility after all.

    Maybe get some light readings and look into what your town says about acceptable light levels.

    • cymbal_king@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      2 days ago

      Yeah this. See if there’s others in your area also concerned about public lighting and advocate together. Too many cities are putting in new LED lights that are way too bright and it’s accelerating light pollution levels. Being able to see stars in the night sky should be something every one can do to connect our humanity.

  • ChaoticNeutralCzech@feddit.org
    link
    fedilink
    English
    arrow-up
    4
    ·
    2 days ago

    lantern

    What kind of lantern? Is it like a bulb/tube (point/linear source of light), with or without reflector, or a 2D LED array? Is it in a transparent or translucent cover?

  • XeroxCool@lemmy.world
    link
    fedilink
    arrow-up
    8
    ·
    2 days ago

    The local government or utility may be able to help. Several lights in my area have shutter shades on them that help control sideways/upwards light and keep the beam focused on the ground. It’s called “light intrusion” when someone else shine slight into your property

  • gastroglizzy@piefed.social
    link
    fedilink
    English
    arrow-up
    13
    ·
    3 days ago

    Tin foil, trash bag, bucket cut into the shape of a hat?

    Or just buy some curtains. Or tape up some tin foil. Or wear a sleep mask.

  • bridgeenjoyer@sh.itjust.works
    link
    fedilink
    arrow-up
    12
    ·
    3 days ago

    Lights you can’t control are awful. We have an insanely bright one on the corner that light pollutes so bad. Even worse now because they are horrible white LED. Warm halogen were 1000x better (youll never convince me otherwise). Same with car headlights. White led gives me a headache even when I’m the driver. I’ll take my 90s warm lights any day.

    This is a corner that get like 20 cars traffic a day. A light isnt even needed. Plus its in my yard.

    • Zoe@piefed.blahaj.zone
      link
      fedilink
      English
      arrow-up
      6
      ·
      3 days ago

      Can I try to convince you that LEDs aren’t the real problem? They’re more energy efficient than any other kind of light and last longer too. Mostly what I think people hate is that LEDs usually have a cooler color temperature, but you can get LED bulbs that are warmer, or even have variable warmth settings

      • WaxRhetorical@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        3 days ago

        Yeah, but the default is to shine with the power of floodlights.
        My apartment is next to a square that has a pole in the middle with some LED lamps. My living room and balcony are uncomfortable at night due to the light from these, it’s frustrating as hell.
        If they used halogen hue and luminosity, it’d be a very different experience.

      • bridgeenjoyer@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        2 days ago

        I believe it’s not only the color, but the actual wavelength of led. There is something about the frequency that messes with my eyes.

          • forestbeasts@pawb.social
            link
            fedilink
            arrow-up
            1
            ·
            17 hours ago

            There’s also the spectrum of light that the bulb puts out. CFLs, and a lot of older LEDs, have huge gaps in the spectrum they put out, which doesn’t show in the color of the light since that’s an average of everything. It DOES show in the colors of things lit by the light, which is why sodium lights make everything look funny. It’s also what people mean when they talk about “CRI” or “R9” or whatever.

            – Frost