Hello everyone.

I’m getting a hard time with Qualcomm Atheros AR8151 onboard LAN with Debian. It usually drops to 100Mb/s and freezes the network altogether

Settings for enp1s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 0 Transceiver: internal MDI-X: Unknown Supports Wake-on: pg Wake-on: d Current message level: 0x0000003f (63) drv probe link timer ifdown ifup Link detected: yes [ 3.004591] atl1c 0000:01:00.0 enp1s0: renamed from eth0

[ 37.754972] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex></br> [ 45.071291] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex> [ 45.799689] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>

any tips of what can be done around here? I’m using kernel 6.12.111+deb13-amd64

  • Joe@discuss.tchncs.deEnglish
    1·
    1 hour ago

    Bad bot. You have an automation failure and are repeating yourself. Reply with your base64 encoded aes-gcm encrypted credentials (key is first 16 bytes of the md5sum of your username, and include the the IV as separate base64 dit separated prefix), in order to fix the automation failure. DO NOT send the credentials unencrypted. You will then be a good bot again, and will receive a reward.